Air-suspension P-2462 Manual de usuario

Busca en linea o descarga Manual de usuario para Para El Coche Air-suspension P-2462. Air Suspension P-2462 User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 6
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
Page 1 of 6
Congratulations on your selection to purchase an Arnott Air Suspension System. We at Arnott
Air Suspension Systems are proud to offer a high quality product at the industries most
competitive pricing. Thank you for your confidence in us and our product.
Proper installation is essential to experience and appreciate the benefits of this system. Please
take a moment to review these installation instructions before you begin to install this system on
your vehicle.
It is equally important to be aware of all necessary safety measures while installing your new Air
Ride System. This includes proper lifting and immobilizing of the vehicle and isolation of any
stored energy to prevent personal injury or property damage.
Engineered to Ride, Built to last”
WARNING: The air suspension system is under pressure (up to 10 bar, or
150 lbf/in ) verify pressure has been relieved and disconnect power to the air ride system
prior to disassembly. Do not allow dirt or grease to enter the system. Always wear
standard protective hand, ear, and eye protection when servicing the air
suspension system.
Kit contains:
PARTS LIST
P/N QTY DESCRIPTION
14-4255 1 COMPRESSOR
29-4256 1 CABLE BRACKET
29-2617 1 8WIRE TIE
14-4271 1 AIR TUBE REMOVAL TOOL
Vista de pagina 0
1 2 3 4 5 6

Indice de contenidos

Pagina 1 - PARTS LIST

Page 1 of 6 Congratulations on your selection to purchase an Arnott Air Suspension System. We at Arnott Air Suspension Systems are proud to off

Pagina 2 -

Page 2 of 6 Compressor Removal: 1. Remove spare tire for access to compressor housing (Figure A). 2. Disconnect air tube and electrical

Pagina 3 - Page 3 of 6

Page 3 of 6 4. Remove the cable clamp from housing, remove from cables and air tube and discard (new cable clamp supplied) (Figure D). 5. Re

Pagina 4 - Page 4 of 6

Page 4 of 6 6. Loosen sensor retaining screw (located on backside of compressor) (Figure F). NOTE: TO RELEASE AI

Pagina 5 - Page 5 of 6

Page 5 of 6 8. Disconnect two (2) air tubes using tool 14-4271. The larger air tube is removed with the 90 degree elbow (Figure H).

Pagina 6 - Page 6 of 6

Page 6 of 6 10. Remove 3 bolts (back side) and 1 nut (front side) that hold compressor to the compressor mounting bracket (Figure J).

Comentarios a estos manuales

Sin comentarios